Department of Mechanical Engineering

• Total Experience  : 20.4 Years
• Teaching (UG & PG)  : 20.4 Years
• Industrial   : 01 Year
• Research & Development  :  10 Years
• Consulting    :   03Years

• PATENTS: GRANTED: 01, PUBLISHED: 08, FILED: 01
• BOOK PUBLISHED: 02
  • 1) Advanced Manufacturing Processes (Elective IV): Semester VII, Mechanical Engineering (Pune  University)  ISBN    978-93-89835-78-6, Jan 2020.
  • 2) Advanced Manufacturing Processes: Semester V, Mechanical Engineering (MSBTE), Tech-Neo   Publications, ISBN 978-93-89460-14-8, Jan 2019.
• BOOK CHAPTER: 01
  • 1) Computational Intelligence in Manufacturing: Process parameter optimization in manufacturing of root canal device using gorilla troops optimization algorithm, Woodhead Publishing (Elsevier),  ISBN  978-0-323-92854-1, 8 May 2022.Edited :(Paulo Davim, Ganesh Kakhandikar)

• FDP on Research opportunities in Advanced Manufacturing Processes (22nd June to 28th June 2020 at BVDU COE Pune.
• Organizing committee member for International Conference on Artificial Intelligence and Robotics (ICAIR-2019), 23-24th August 2019, Mumbai, India.
• Co-Ordinator: Two-day workshop on “3D Printing and its Applications” (Mech. Dept.) B.V.D.U. Pune on 24th -25th January 2019.
• Two-day workshop on “Research in Renewable energy” (Mech. Dept.) B.V.D.U. Pune on 23rd -24th February 2017.

• AWARDS/ DISTINCTIONS:

  1. Fellow : Maharashtra Academy of Science Dec 2023
  2. Fellow Member: FIIET, Andhra Pradesh ,5 Sept 2023
  3. Young Associate : Maharashtra Academy of Science Nov 2022
  4. JEWEL OF INDIA AWARD: For Outstanding Achievements and Remarkable contribution in chosen of field of activity 14th May 2023 at New Delhi.
  5. BHARAT EDUCANIST PURSKAR: KTK Outstanding Achievers and Education Foundation presents on 1 May 2022 at New Delhi.
  6. BEST RESEARCH AWARD: Virtual International Awards on multidisciplinary research and Innovation GOV of Japan and India, 18 March 2022 at New Delhi.
  7. BHARAT SHIKSHA GAURAV PURSKAR: KTK Outstanding Achievers and Education Foundation in association with Helium Production both are renowned organizations presents on 20 February 2022 at New Delhi.
  8. Certificate of Excellence: KTK Outstanding Achievers and Education Foundation for Outstanding Achievements and Remarkable Contribution in the field of Education at New Delhi 20 February 2022.
  9. Best paper award: S.S Pachpore, Pradeep V. Jadhav “3rd International e-Conference on Frontiers in Mechanical Engineering and nanotechnology (NPBBI2021) at Satybhama Institute of Science and technology in association with Indian association of applied microbiologists (IAAM) California Institute of science and Medicine, USA.10-12 November 2021.
  10. Best paper award “2nd Biennial   International Conference on Nascent Technology in Engineering (ICNTE-2017)” at Fr. C Rodrigues Institute of Technology Vashi, Navi Mumbai. 27-28 Jan 2017. 
  11. Got “Award of Excellence” National Conference on Design, Manufacturing, energy & Thermal Engineering (NCDMETE-17) at Dr. Daulat Rao Aher college of Engineering, Karad, 7th January 2017.
  12.  Award of the Grant- in-aid (R&D) (Rs.60, 000) Received from IEI, August 2011.
  13. Won second prize for paper presentation at 48th National Conference (IIIE), Bangalore, 2006.
  14. NPTEL Online Certification (MHRD. Gov of India) course completed on “Advanced Manufacturing Processes “IIT Kanpur (JAN-APR 2020)
  15. NPTEL Online Certification (MHRD. Gov of India) course completed on “Introduction to Mechanical Micromachining “IIT Khargpur (JAN-APR 2019)
  16. NPTEL Online Certification (MHRD. Gov of India) course completed on “Design and Quality, management and Assembly” IIT Madras (AUG-Sep.2018)
  17. NPTEL Online Certification (MHRD. Gov of India) course successfully completed on “Advanced Materials and Processes” IIT Khargpur (July-Oct.2018)

  
  COLLABRATION WITH INDUSTRY (MOU):

  ? Memorandum of Understanding (MOU) 2014-15: - Bhartai Vidyapeeth University College of Engineering and NORD Drive systems Private Limited, a Company registered under the Company’s Act, 1956, having its registered office & works at 282/2, 283/2, Plot No. 15, Muja Village Mann, Taluka Mulshi, Adj. Hinjewadi MIDC Phase II, Pune 411057, Maharashtra, India.

  ?  Closely associated with many companies like BARC, L&T, ATLAS CAPCO PUNE, PANAMA INDUSTRIES, Kala group of industries, Wiello and TATA MOTORS etc

Publications:
International Journal : 58
National Journal :01
International /national Conference : 25
Book/Book Chapter  :03
Scopus :28
Web of Science/ICI :13
Google Scholar : 50

1.         Pradeep Jadhav, Rahul Dhabale et al, Atish Mane Multi objective Optimizations of friction stir welding     process parameters for reinforcement of copper particles in aluminum alloy using Taguchi based grey relational analysis (GRA) and ANOVA. “Journal of Physics,2604 (2023) 012001 IOP Publishing doi:10.1088/1742-6596/2604/1/012001
2.        Pradeep Jadhav, Atish Mane “Mathematical Modelling of Response Parameters During Ultrasonic Assisted Electro-Discharge Machining Process” International Journal of Engineering Trends and Technology Volume 71 Issue 5, 175-181, May 2023 ISSN: 2231–5381/ https://doi.org/10.14445/22315381/IJETT-V71I5P218. (Scopus )
3. Atish Mane, P.V.Jadhav et al, “Optimization of Ultrasonic Assisted Electro-discharge Machining Process Parameters through Surface Response”Techno-societal 2022. ICATSA 2022. Springer, Cham. https://doi.org/10.1007/978-3-031-34644-6_69,Published 23September 2023,Print ISBN978-3-031-34643-9,Online ISBN978-3-031-34644-6
4. AKash Shas P.V.Jadhav et al, “Filament Fabrication for 3D Printing Using Waste PET Material”Techno-societal 2022. ICATSA 2022. Springer, Cham. https://doi.org/10.1007/978-3-031-34644-6_54 23September 2023,Print ISBN978-3-031-34643-9,Online ISBN978-3-031-34644-6
5.        Pradeep Jadhav,Sachin Khomane“Fabrication of PDMS based micro channel for lab-on-a-chip application using CO2laser machining”AIP Proceedings 2716, 030011 (2023)  https://doi.org/10.1063/5.0129777, vol 2716, No.1 May 2023, pp020010-1-1-020010-7. (Scopus )
6.        Pradeep Jadhav,V.R.Patil“Bearing element integrity analysis using dimensional analysis and response surface method (RSM) for fault diagnosis of rotor bearing system” AIP Proceedings 2716, 030011 (2023)  https://doi.org/10.1063/5.0136995, vol 2716, No.1 May 2023, pp030013-1-030013-16. (Scopus )
7.        Pradeep Jadhav,V.R.Patil“Experimental and numerical investigation on fault diagnosis of horizontal rotor-bearing system using central composite rotatable design (CCRD) ” AIP Proceedings 2716, 030011 (2023)  https://doi.org/10.1063/5.0129785 , vol 2716, No.1 May 2023, pp030015-1-030015-16. (Scopus )
8.        Pradeep Jadhav,Atish Mane“Multi-objective optimization in wire electro discharge machine turning of stain less steel 316” AIP Proceedings 2716, 030011 (2023)  https://doi.org/10.1063/5.0129785 , vol 2716,  No.1 May 2023, pp030011-1-030011-9. (Scopus )
9.        Swanand Pachore. Pradeep Jadhav “Investigation and assessment for specific volume of Gutta-Percha as a biomaterial in RCTI”, Published by Elsevier, Materials today: Proceedings, https://doi.org/10.1016/j.matpr.2022.08.499 13.9.2022 (Scopus)
10.        Sumit Dubal, Pradeep Jadhav, “Effect of stabilization on structures and properties of electro spun         polyacrylonitrile based carbon nanofibers as a binder free electrode for super capacitor application”, Published by Elsevier, Materials today: Proceedings, https://doi.org/10.1016/j.matpr.2022.07.250 2.8.2022 (Scopus)
11.         Swanand Pachore. Pradeep Jadhav “A survey inti challenges and the need for heating element technology in root canal procedures” Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page 15-20, 2022; DOI: 10.55708/js0112003
12.         Swanand Pachore. Pradeep Jadhav “Investigation on canal and Stress Intensity Patterns in Dental Canals” International Journal of Mechanical Engineering, ISSN: 0974-5823, vol 6, No.3 Dec. 2021, pp3398-3405. (Scopus Journal)
13.         Anvit Patil, P.V.Jadhav “Fabrication & Mechanical Testing Of Metal Matrix & Composite Material” International Journal of Mechanical Engineering, ISSN: 0974-5823, vol 6,No.3 Dec. 2021,pp3395-3397. (Scopus Journal)
14.         Sachin Khomane, Pradeep Jadhav, et al “Experimental Investigation of Tensile and Flexural Strength of Banana & Coir Fibers hybrid composite” International Journal of Mechanical Engineering, ISSN: 0974-5823, vol 6, No.3 Dec. 2021, pp3392-3394. (Scopus Journal)
15.         Atish Mane,P.V.Jadhav “Optimization Of Response Parameters of Electrical Discharge Machine Using Shape Memory Alloy” International Journal of Mechanical Engineering, ISSN: 0974-5823, vol 6,No.3 Dec. 2021,pp3386-3391. (Scopus Journal)
16.        Swanand Pachore. Pradeep Jadhav, Ratnakar Ghorpade “Analyzing relation of canal operating force                     and canal curvature in RCT:A mathematical overview” Published by Elsevier, Materials today: Proceedings 2021 (Scopus)
17.     Atish Mane,P.V.Jadhav, D.S.Bilgi“Enhancement of surface finish of shape memory alloy using electrical discharge machine”Annals of R.S.B.C. ISSN: 1583-6258, Issue 5,,2021,pp5224-5232. (Scopus Journal)
18.     D.B.Jadhav.P.V.Jadhav and D.S.Bilgi “Anodic dissolution of gamma titanium aluminide Ge 48-2-2, TNM b1 and TNB V5 materials using Electrochemical machining electrolytes for aviation application” International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)Trans Stellar Pub, ISSN (P): 2249–6890; ISSN(E): 2249–8001,Vol 10,issue 3,June 2020 ,pp11001-11010.(Scopus Journal)
19.     V.R.Patil Pradeep Jadhav “Dynamic response analysis of unbalanced rotor bearing system with internal radial clearance “A Springer Nature Journal (Switzerland AG 2020),SN Applied Sciences,15th Oct 2020 2:1826  https://doi.org/10.1007/s42452-020-03608-y. (Scopus Journal)
20.       Manoj Wagh,Pradeep Jadhav, “Continuous electro coagulation process for automation in plant technology”. Techno-societal 2018, 2nd International conference on Advanced Technologies for societal applications” at SVERI Pandharpur, 14th- -15th Dec. 2018. (Springer Nature Switzerland AG 2020)
21.         Ranjeet Gidde, P.V.Jadhav et al, “CFD Based Analysis of Simple T-Junction and Y-Junction Micro Mixerswith Different Obstacles Techno-societal 2018,2nd International conference on Advanced    Technologies for societal applications” at SVERI Pandharpur, 14th- -15th Dec.2018.(Springer Nature               Switzerland AG 2020)
22.        D.B.Jadhav,P.V.Jadhav,“Model analysis of ultrasonic stack Assembly” Techno-societal 2018, 2ndInternational conference on Advanced Technologies for societal applications”14th-  -15th Dec. 2018..(Springer Nature Switzerland AG 2020)
23.         Sachin Khomane ,Pradeep Jadhav,“Experimental investigation of crack for tensile loading condition by using hole drilling method” Techno-societal 2018, 2nd International conference on Advanced Technologies for societal applications” 14th-  -15th Dec. 2018..(Springer Nature Switzerland AG 2020)
24.        Anil shinde, Pradeep Jadhav et al,“Optimization of Multiple Performance Characteristics of Surface Micro- Textured Journal Bearing” 2nd International conference on Advanced Technologies for societal applications” (Springer international Publishing)14th- -15th Dec.2018.(Springer Nature Switzerland AG 2020)
25.        Akash Sah, Pradeep Jadhav, “Linear Static Analysis and Dynamic Analysis of a Mono-tyre Bike Wheel Inner-Hub Design Using Finite Element Analysis” 2nd International conference on Advanced Technologies for societal applications” (Springer international Publishing)14th-  -15th Dec. 2018.(Springer Nature Switzerland AG 2020)
26.      Sachin Khomane, Pradeep Jadhav, et al “Experimental Investigation Of Mechanical Properties Of The Natural Hybrid Composite Using Epoxy, Banana & Coir Fiber” NOVYI MIR Research Journal, Volume 5, Issue 6, ISSN No: 0130-7673(Web of science) 2020, pp46-51.
27.      Swanand Pachore. PradeepJadhav “Investigation Of A Mechanical Properties Of A Banana & Bagasse Fibre Composite By Using Naoh And H2o2 Treatment”, Studies in Indian Place Names (UGC CARE Journal) ISSN: 2394-3114 Vol.40-Issue.88-March, 2020.
28.      Swanand Pachore. PradeepJadhav “Knowledge Based Engineering and It's Application in Engineering: A Review” International Journal for Scientific Research & Development, Vol.8,Issue 1,2020,ISSN 2321-0613,pp 453-463.
29.      Swanand Pachore. PradeepJadhav, Ratnakar Ghorpade “Challenges in the development of a new abjuration device: A questionnaire survey” International Journal of Advance Research, Ideas and Innovations in Technology, ISSN: 2454-132X ,Impact factor: 6.078 ,(Volume 6, Issue 4),2020,pp294-301.
30.     Manoranjan Singh,P.V.Jadhav, Sandeep Anasane,”Experimental Investigation on Analysis of Taper Angle of Micro-Holes Machined on Inconel 718 by Electrochemical Micromachining,International Journal of Advanced Science and Technology Vol. 29, No. 3s,  July 2020, pp. 2086 – 2097,
31.     Akash Shah, Pradeep Jadhav“ Cornering Fatigue Test and Radial Fatigue Test on a Rim with steps for a Mono-tyre E-Vehicle using Finite Element Analysis”,International Journal of Advanced Science and Technology Vol. 29, No. 3s, (2020),  July 2020pp. 2078 – 2085.
32.     Bhushan Nikam,P.Bramhankar,Pradeep Jadhav et al,“Fabrication of Micro-Arrayed structure using Reverse EDM: a Multi-objective Optimization”, Publishedby Elsevier, Procedia Manufacturing 20(2018),(Scopus)(www.sciencedirect.com), pp 160-167.
33.        Praveen Kr,Pradeep Jadhavetal,“Review Paper on ECM, PECM and Ultrasonic assisted Pulse electrochemical machining (USA-PECM)”Published by Elsevier, Materials today: Proceedings 5(2018)(Scopus) pp6381-6390. 
34.        Pradeep Jadhav,Vijay Patil et al,“An Experimental and Numerical Investigation on Static Vibration Response of Multi-Cracked Rotor Shaft” International Conference on Mechanical, Materials and Renewable Energy IOP Publishing IOP  Conf. Series: Materials Science and Engineering377 (2018) 012095 doi:10.1088/1757- 899X/377/1/012095 (Scopus).
35.     D.B.Jadhav,P.V.Jadhav ,D.S.Bilgi,“Experimental Investigation of MRR on Inconel 600 using Ultrasonic Assisted Pulse Electrochemical Machining” International Conference on Mechanical, Materials and Renewable Energy IOP Publishing IOP Conf. Series: Materials Science and Engineering377 (2018) 012095 doi:10.1088/1757-899X/377/1/012095 (Scopus).
36.     P.V.Jadhav, D.S.Bilgi,Abhaysawant,“Experimentation Investigation on Taper Angle of Micro-Electro discharge Machining based on taguchi Method” IEEE Publisher (978-1-5090-2794-1/17/ ©2017 IEEE) (Scopus).
37.     Atish Mane,P.V.Jadhav, “Review of Electro discharge machine (EDM) and Ultrasonic assisted electro discharge machine (USA-  EDM) IOSR journal of engineering (IOSRJEN) ISSN(e): 2250-3021, ISSN(p): 2278-8719,2018,pp11- 14.
38.        Shantanu Pawar ,P.V.Jadhav et al,“Design and analysis of sandwich composite spring for HMV”International Journal of Mech150anical Engineering and Technology (IJMET) Volume 8, Issue 9, September 2017, (Scopus), pp. 01–17.
39.       Angel,P.V.Jadhav,“Finite Element analysis of wheel rim for cornering and radial load condition” journal of emerging and Technologies and Innovative research (JETIR) vol.5, issue 6, 2018, pp 461-466.
40.       V.R. Patil,,P.V.Jadhav, “Development of prototype of light passenger Quarter Car for Improved Vehicle ride Characteristics” ICTSA (Springer International Publishing, DOI: 10.1007/978-3-319-53556-2_87  pp 855-867, 17 June 2017
41.        Sunil Kadam,P.V.Jadhav,“Synthesis of TiO2 Nanofibres for Solar Cells and Their analysis using Statical         tool-ANOVA” ICTSA (Springer International Publishing, DOI: 10.1007/978-3-319-53556-2_57)        June 2017, pp 561-567
42.       Namrata Deshmukh, P.V.Jadhav et al,“TiO2 Nanofibre and its potential application: Review”International journal of innovative technology and Research (IJITR) Vol.No4, issue No. 2, July 2017.pp11-13.
43.        Shantanu Pawar, P.V.Jadhav“A Review: Computer aided analysis for weight optimization of leaf spring using intermediate layers of GFRP and GFRP” International journal of innovative technology and Research (IJITR) Vol.No4, issue No. 1, July 2017.
44.        P.V. Jadhav.D.S.Bilgi,Harel,“Design and development of electrode for ultrasonic assisted pulse electrochemical machining” IJRITCC, Vol.5,Issue 6,June 2017,pp 120-125.
45.        Tejas vakil,Pradeep Jadhav et al “Short Review: Different type of Ionic Liquids for CO2 absorption” International journal for Scientific research & development (IJSRD) .No4, issue No.4, June, 2016, pp 870-874.
46.        Vijay Kumar,Pradeep Jadhav et al, “A Brief review on different synthesis Methods of CZTS Nano- particles. International journal for scientific research & development (IJSRD) .vol4, issue No.4, June, 2016, pp1102-1103.
47.        Shekhar shinde,Pradeep Jadhav,“Thermo Mechanical analysis of cylinder liner” International journal of Engineering and General Science (IJERGS) Vol.No4, issue No.3, May-June, 2016, pp 296-306.
48.        Atish Mane,P.V.Jadhav,“Addressing Trade-Off in The Expendables Encountered During Evolution of the Performance Metrics of Electro-Discharge Machining”. International journal of Informative & Futuristic Research (IJIFR) Vol.No3, issue No.8, April 2016, pp 3019-3029.
49.        Shekhar shinde, Pradeep Jadhav “Failure Investigation and Thermo-Mechanical Analysis of Cylinder Liner” International journal of Scientific Research in Science, Engineering and Technology (IJSRSET) Vol.No2, issue No.2, March-April 2016, pp2395-4099.
50.        P.V.Jadhav,Dashore, “Biomass Briquette System: Pollution free Thermal energy Resources” International journal of innovative Research in Science, Engineering and Technology (IJIRSET) Vol.No5, issue No.1, January 2016, pp 1165-1171.
51.        P.V. Jadhav, Kedar,Shashikant ashore, “Development of Basin solar Still” International journal of innovative technology and Research (IJITR) Vol.No3,issue No. 5, August –September 2015, pp2432-2435
52.        D.S.Bilgi, Pradeep Jadhav, “Experimental Investigation of Ultrasonic Assisted Pulse Electrochemical Drilling for INCONEL 718 with Rotary Tool” International Journal of Manufacturing Technology and Management (IJMTM) Interscience publishers,  Vol. 28,no.1/2/3, 2014 ,  (Scopus) pp.4-18
53.        P.V.Jadhav. D.S.Bilgi et al, “Experimental Investigation on MRR of Pulse Electrochemical machining (PECM) based on Taguchi Method,” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 1, 2014, pp.8800-8809.
54.        Anamika,P.V.Jadhav et al “CFD Analysis of Electrolyte flow Pattern in Pulse ECM and to Optimize Process Parameters for Circular Tool” International Journal of Engineering Research and General Science (IJERGS), June 2014 impact factor 3.843, ISSN. 2091-2730. pp. 266–275,
55.       Anamika,P.V.Jadhav et al, “CFD Analysis of Electrolyte flow Pattern in Pulse Electrochemical machining” International Journal of Engineering Innovations and Research (IJEIR), June 2014 , vol 3,issue3, impact factor 3.12, ISSN. 2277-5668. pp. 358-364,
56.        P.V.Jadhav.D.S.Bilgi ,Harel, “An Experimental Investigation in to the Spike Profile Obtained During Pulse Electrochemical Drilling of Blind Holes” International Journal of Engineering Science and Technology (IJEST), Feb. 2011, Engg. And Technology Publication, ISSN. 0975-5462. pp. 1682-1692
57.         P.V.Jadhav.D.S.Bilgi et al, “Enhancement of Surface Finish of Pulse Electrochemically Machined (PECM) Surface Using Rotating Electrode.”International Journal of computer and information system (IJCCIS).vol2,no 1 ISSN: 0976-1349 dec 20100 n Engineering and Technology, December 2010, Goplax   Publication Singapore, pp. 49-54.
58   P.V.Jadhav.D.S.Bilgi,“Analysis and Determining the Ranking of ECM Parameters for Surface          Roughness by ANOVA and AHP Method”.International Journal of Advanced Engineering Applications. Vol-1, Issue-5, 2008.pp-32-38.

NATIONAL JOURNALS (01)

   1.         D.S.Bilgi , P.V.Jadhav,"Effect of Parameters on Surface Roughness of Electrochemically Drilled Deep Hole Using Rotating Electrode and a Moving Electrode” Journal of Multidisciplinary Engg. Technology, Bharati Vidyapeeth College Of Engineering, New Delhi.pp.1-10, Jan 2008.

INTERNATIONAL CONFERENCE (25)

1.  Atharv Kulkarni, P.V.Jadhav, “Advanced inspection robot for rescue operation using computer vision artificial intelligence and machine learning” International Conference on Convergence in Technology ICCT 2023, on 8th-9th Sept.2023 at Dr.D.Y.Patil of Technology, Pimpari, Pune  Maharashtra.
2.  Niteesh Pawar, P.V.Jadhav, S.S.Pachpore “Structural optimization of ATV chasis using FEA Analysis”  5th  International e-Conferance f rontiers in materials engineering and nano Technology ,ICF-MET-2023,May 5-6th 2023, at Shri Yashwantrao Patil Science College Solankur, Maharashtra.
3.  P.V.Jadhav,S.S.Pachpore “On the Robotics in Endodontics”  5th  International e-Conferance f rontiers in materials engineering and nano Technology ,ICF-MET-2023,May 5-6th 2023, at Shri Yashwantrao Patil Science College Solankur, Maharashtra.
4.  Rahul Dhabale,P.V.Jadhav,S.S.Pachpore “On the Materials employed in Additive Manufacturing Techniques”  5th  International e-Conferance f rontiers in materials engineering and nano Technology ,ICF-MET-2023,May 5-6th 2023, at Shri Yashwantrao Patil Science College Solankur, Maharashtra.
5.  Tanmay Salake,P.V.Jadhav,S.S.Pachpore “Optimization of Plastic Injection Molding and Hand Molding Processes with Different Gate and Runner Designs through FEA Analysis”  5th  International e-Conferance f rontiers in materials engineering and nano Technology ,ICF-MET-2023,May 5-6th 2023, at Shri Yashwantrao Patil Science College Solankur, Maharashtra.
6.  Swati Shinde, P.V.Jadhav, “Design of Various Rotor Geometries for Twin Lobe Blower Using Parametric Equations.” Sardar Patel International Conference on “Industry 4.0 - Nascent Technologies and Sustainability for 'Make in India' Initiative” SPICON-2022.on 22nd - 23rd December 2022, at SPCE, Mumbai in association with SPIT, Mumbai, Capgemini, SAE India WS, IE(I), IIIE, FELA and technical collaboration with American Institute of Physics & IEEE Bombay Section  8th-9th Sept.2023. Maharashtra.
7. Manoranjan Singh, P.V.Jadhav, “Experimental investigation on taper angle of micro-Electrochemical machining using Taguchi Method” 2ndInternational Conference on “Enhancement and innovations in Exploring Engineering ICEIEE 2019, on 12 th July 2019 at Kula Lumper, Malesiya.
8. Akash Sah,Pradeep Jadhav, “Cornering fatigue test and radial fatigue test on a rim with steps for monotyre E-Vehicle using FEA” 2ndInternational Conference on “Enhancement and innovations in Exploring Engineering ICEIEE 2019, on 12 th July 2019 at Kula Lumper, Malesiya.
9.  Manoranjan Singh,Pradeep Jadhav,“Experimental investigation on analysis of overcut of micro-holes machined on INCONEL 718 by electrochemical micromachining” IITER International Conference 14thJuly 2019, at Pacific hotel Singapore
10.  Manoranjan Singh,P.V.Jadhav,“A literature review on Electrochemical Micro-Machining (ECMM) of Nickel based super-alloys” International Conference on Recent Innovations in Engineering and Technology (ICRIET-19) 15th and 16th February 2019. JSPM College of Engg. Pune.
11.  P.V.Londhe, P.V.Jadhav et al,“Synthesis of Biofunctional Nanofibers (curcumin, elatine and formic acid) Using Electrospinning process and optimization of parameters for diameter for diameter of Nanofibers” 4th International Conference on Nanotechnology application, Advances and Innovations (NANOCON 018), 25th,26thOctober 2018 at Pune.
12.  Akash Sah,Pradeep Jadhav, “Finite element analysis of wheel rim and inner rim hub for cornering and radial load condition” Techno-societal 2018, 2nd International conference on Advanced Technologies for societal applications” at SVERI Pandharpur, 14th-  -15th Dec. 2018.
13.  P.V.Jadhav,V.R.Patil “Vibration Response of Double Row Ball Bearing on Local Defects using Multivariable Regression Analysis”,1st International Conference on Materials, Manufacturing and Design Engineering (iCMMD 2016)December 20-21, 2016 at Department of Mechanical Engineering Dr. Babasaheb Ambedkar Technological University ‘Vidyavihar’, Lonere, M.S. India. 402103.
14.  P.V.Jadhav,D.S.Bilgi,“Analysis of Surface Roughness in Pulse Electrochemical Machining by Using Response Surface Methodology” 6th International and 27th All India Manufacturing Technology, Design and Research Conference AIMTDR 2016. Dec 16th-18th, 2016
15.  P.V.Jadhav,RajatBhat,”An Experimental Investigation in Micro-EDM of INCONEL 718 Alloy Using Taguchi Method”6th International and 27th All India Manufacturing Technology, Design and Research Conference AIMTDR 2016. Dec 16th-18th, 2016.
16.  P.V.Jadhav,D.S.Bilgi,“Micro and Nano Machining by Electrochemical Processes: Review” 3rd International Conference NANOCON 014 Smart Materials, Composites, Applications and New Inventions at Bharati Vidyapeeth University Pune. (India), 14th, 15th October, 2014.
17.  P.V.Jadhav,D.S.Bilgi,Harel,“Experimental Investigation of Ultrasonic Assisted Pulse Electrochemical Drilling for INCONEL 718 with Rotary Tool” 4th International and 25th AIMTDR Conference2012 at Production Engineering Department College of Engineering, Jadhvpur University on   14th – 16th December 2012. Pp. 542-546.
18. P.V.Jadhav,D.S.Bilgi“Design of Ultrasonically Assisted PECM tool Using Finite Element Analysis” International Conference on PRECISION, MESO, MICRO and NANO FINISHING”, on December 10-11 ,2011,at (COEP) Production Engineering Department  College of Engineering, Pune. Pp 433 to 437.
19. P.V.Jadhav,D.S.Bilgi “An Investigation into Enhancement of Surface Finish of Pulse Electrochemical   Machining”. Conference of Industrial and Production Engineering, National Institute of Technology, Jalandhar 3-5th Dec 2010.
20. P.V.Jadhav,D.S.Bilgi “An Investigation into Enhancement of Surface Finish of Pulse Electrochemical Machined Surface Using Rotating Electrode”. 1st Int. Conf on DRILLING TECHNOLOGY,Department of Ocean Engineering, Indian Institute of Technology Madras, 19th Nov 2010.

21. P.V. Jadhav,D.S.Mankar,““Effect of Surface Roughness on Fatigue Life of Machined Component of  INCONEL 718” Intl. Conf. On NANO Technology materials & composites for frontier applications proceedings, BVDU Pune, 14-15th Oct 2010.

22. P.V.Jadhav,D.S.Bilgi,“An Experimental Investigation inti spike profile obtained during electrochemical drilling of blind holes” TEAM TECH 2008 ,International conference  and Exibition on Total engineering Analysis & Manufacturing Technologies.dayanand Sagar Institutionsds Bangalore15/8/2008.

23. P.V.Jadhav,D.S.Bilgi,““Process Planning Support System for Green Manufacturing & its Application”. Indo-Italian International conf. On green & clean environment, MAEER’s MIT COE. Pune, 20-21st March 2008.

24. P.V.Jadhav,D.S.Bilgi,““Improvement of Electrochemical Machining (ECM) Accuracy by Using Rotating Electrode Movement” Int. Conf. On Exhibition on Total Engineering Analysis and Mfg. Technologies, IISC Bangalore.  Pp. 86, 2007.

25. P.V.Jadhav,D.S.Bilgi,“.“Surface Finish Improvement of Electrochemically (EC) Drilled Deep Hole Using Rotating Electrode over Stationary Electrode” International conference on Advances in machine design & industry automation – Govt. COEP, Pune, Jan 10 -12, 2007.